Velleman PCS100AU

The PCS100AU is a digital storage oscilloscope that uses a computer and its monitor to display waveforms.  All standard oscilloscope functions are available through the supplied Windows program.  Connects to PS's parallel printer port through optical isolation. Scope or transient recorder has only a single channel with a sampling frequency up to 32MHz.

• 110vac power supply adapter (included?).
• general:
  • 1 channel
  • input impedance: 1Mohm/30pF.
  • frequency response: 0Hz to 12MHz (± 3dB).
  • step markers for voltage, time and frequency.
  • vertical resolution: 8 bit.
  • auto setup function.
  • optically isolated from computer.
  • record and display of screens & data.
  • supply voltage: 9 - 10V DC / 500mA.
  • dimensions: 9" x 6.5" x 1.8".
  • weight: 14oz.
• minimum system requirements:
<>IBM compatible PC, Microsoft Windows 95, 98, ME, (Win2000 or NT possible).
• SVGA display card (min. 800x600).
• mouse.
• free printer port  LPT1:, LPT2: or LPT3:.
• CD Rom player.
• optional soft carry case.
  
• Includes 1 insulated measurement probe x1/x10 (part # PROBE60S)

• oscilloscope:
  • timebase: 0.1µs to 100ms per division
  • trigger source: CH1 or free run
  • trigger level: adjustable per ½ division
  • input sensitivity: 10mV to 3V per division
  • record length: 4096 samples
  • sampling frequency: 800Hz to 32MHz (Real time)
  • true RMS readout (only AC component)
• transient recorder:
  • timescale: 20ms/div to 2000s/div
  • max record time: 9.4hour/screen
  • automatic storage of data
  • automatic recording for more than 1 year
  • markers for time and amplitude
  • zoom function
• spectrum analyzer:
  • frequency range: 0 .. 400Hz to 16MHz
  • linear or logarithmic timescale
  • zoom function

• DSO_Link.zip (296 kB)
  
• PCS500-100.pdf (177 kB)
  
• Oscilloscopes_Cross_Reference.pdf (102 kB)

Velleman PCS500AU

The PCS500AU is a digital storage oscilloscope that uses a computer and its monitor to display waveforms.  All standard oscilloscope functions are available through the supplied Windows program.  Connects to PS's parallel printer port through optical isolation. Scope and transient recorder have two separate channels with a sampling frequency up to 1GHz.

• inputs : 2 channels, 1 external trigger input.
• input impedance : 1Mohm // 30pF.
• frequency response : 0Hz to 50MHz (± 3dB).
• max. input voltage at BNC connector: 100V (AC + DC).
• max. signal amplitude measurable is up to 600Vp (AC+DC) with included x10 probe.
• input coupling : DC, AC and GND.
• optically ISOLATED from computer.
• supply voltage : 9-10V DC / 1000mA.